The right non slip coating increases safety and prevents accidents
Slips and trips are a serious problem, both at home and in the workplace. In Vietnam, slips and trips account for a great number of all workplace injuries, and most accidents involve slips. If you are an employer, you have duty of care to provide a safe workplace for your employees, and are liable if you neglect it. Fortunately there is a simple remedy: a non slip coating is easily applied and effective in preventing slip-caused injuries.
Stairs are the leading cause of slipping, but any floor that is wet or dirty becomes a heightened risk. Surfaces such as handrails, door handles, and tool grips can also benefit from a non slip paint. Here we will provide you with all the information you need to determine which non slip coating solution is right for your project, and help you find the anti slip product you need.
A guide to determining the best non slip coating for your project
How you choose your non slip coating depends upon a number of factors. Non slip paints are numerous, and many are intended for specific substrates or end uses. When choosing your paint therefore, it is paramount that you keep in mind:
- Your substrate type: metal, concrete, wood, plastic, etc.
- Your substrate’s environment: Is there a risk of chemical exposure, abrasion, UV radiation?
- The intended end use: Will it need to withstand mechanical loads and heavy impacts, or is it for foot traffic? Is it in a setting where health and cleanliness is a concern?
Once you know exactly what you need from your coating, you need to understand the demands of each coating type. Non slip coating comes in three different types: as a separate paint and non slip additive which need to be combined, a premixed coating, and as a nano coating.
1. Anti slip additive for any coating system
Aggregate can be mixed with almost any coating; suitable for all substrates
What it is: Anti slip properties are given to a coating by adding an aggregate such as sand, glass beads, rubber crumb, and others. The aggregate provides a rough surface which prevents slipping. Aggregate can be mixed through a coating before application, or sprinkled over a still wet first coat. If the second, it should be allowed to dry before having excess aggregate brushed away and a second coat applied on top. The aggregate comes in three grades: fine, medium, and coarse, in order of increasing anti slip strength.
Recommended for: Heavy industrial-use flooring to kitchen floors, aggregate is a flexible material. However, which aggregate you choose will affect which coating you can use: glass beads and synthetic aggregate can be combined with acrylic coatings as well as resin coatings (epoxy, urethane, polyaspartic and polyurea), whereas silica sand, aluminium oxide, coloured quartz and flint silica aggregates can only be used with resin coatings. However, adding your own aggregate gives you control over the result.
2. Ready-to-apply premixed systems
Available for all substrates, each substrate requires a coating made for it
What it is: The simplest of the non slip coatings, these products come with aggregate pre-mixed, either as a two- or single-component rubberised paint systems, or create a rough textured surface as the coating dries. These coatings are durable, water and oil resistant, and come in epoxy, polyurethane varieties. They are often divided into categories based on specific need; Offshore (corrosion resistant non slip paint for metal surfaces), Industrial (chemical and abrasion resistant coatings) and Commercial (aesthetically appealing non slip coatings).
Recommended for: Interior and exterior floors, walkways, decks, patios, mild industrial and commercial environments with up to heavy pedestrian foot traffic and light rubber wheeled cart traffic. Hospitals, kitchens, change rooms, schools, anywhere that requires a non slip floor paint.
3. Nanotechnology systems
Suitable for all substrates
What it is: A non slip coating based on nanotechnology uses the numerous benefits of nano coatings and adds one more by making them non slip, too. A relatively new process, the non slip coating with nanotechnology provides a textured surface on a scale so small it is virtually unnoticeable, but which actually becomes even more non slip when it is wet. These coatings are also durable, waterproof, abrasion resistant, long-lasting, low-maintenance, and non-toxic.
Recommended for: Applications which require a clear, glossy finish and very thin coating profile. Nano non slip coatings can be used for interior and exterior applications including entryways and ramps, in food preparation areas, in wet-prone areas like spas, swimming pools, and leisure centres.
Non slip coating Vietnam – the specialists in anti slip floor paint
Anti slip floor paint is available from several suppliers in Vietnam. Manufacturers like Jotun and Hempel for example offer their products for the marine and offshore environments through trusted distributors. If you would like any more information about non slip floor paint for your project, our experts are here to help. Get in contact through the “Request a quote” button at the bottom of the article and use our 100% free service. We in cooperation with our specialised partners make sure you get the non skid paint your surface requires!